Onduleur Mercury 650 VA Elite Pro
Cet onduleur fournit une alimentation par batterie temporaire, en cas de panne de courant
Analyse des pannes de batteries avec alerte précoce, permettant ainsi d’effectuer à temps
une maintenance préventive. En plus de cela, cet onduleur est un régulateur de tension.
Caractéristiques techniques Mercury 650 VA
Type: interactive;
Puissance: 650 VA;
Onde de sortie: vitesse d’approximation d’une onde sinusoïdale;
Le temps de transfert de la batterie: 8 MS;
Le nombre de sortie connecteurs d’alimentation: 3 (d’eux à piles – 2);
Type de sortie connecteurs d’alimentation: IEC 320 C13 (l’ordinateur);
Entrée / Sortie
Entrée: 1-tension de phase;
Sortie: 1-tension de phase;
Tension d’entrée: 140 – 285;
Facteur de puissance: 0.6;
Les fonctionnalités
Affichage de l’information: indicateurs led;
Alarme sonore: oui;
Démarrage à froid: oui;
La Protection
Protection de surcharge: oui;
Protection contre les impulsions à haute tension: oui;
Filtrage de bruit: oui;
Protection de court-circuit: oui;
Informations supplémentaires
Couleur: noir;
Dimensions (LxHxP): 145x230x370 mm;
Poids: 6.5 kg;
- Build in AVR with wide input range of 140~300VAC
- Auto restart
- Output short circuit protection
- Overload protection
- Overcharge protection
- Sleek and compact design with CPU control
Input voltage |
220VAC |
Input frequency |
50Hz |
Input phase |
Single phase |
Input socket |
With Fuse |
Cold Start (0 to 100% load) |
Press the ON/OFF switch |
Input range (220V) |
140V-300V |
Rating output (VA). |
650VA |
Rating output (W). |
390W |
Rating output (W). |
Battery mode(simulated sine wave), AC mode (sine wave) |
Power factor |
0.6 |
Rating voltage |
220V |
Output range |
220Vac-7%+15% ( in battary mode ) |
Rear Output Socket |
2xUniversal – Battery backup |
Transfer time |
TYPICAL 4-8 ms |
Communication Interface |
NIL |
Rating frequency |
50Hz |
Output Frequency Line-mode |
Synchronize with the Utility |
Battery mode |
50 Hz±1Hz |
Output Frequency Line Mode |
Synchronize with the utility |
Short Circuit Protection Line Mode |
FUSE & firmware protection |
Battery Mode |
Software protection controlled by firmware |
Overload Protection Line Mode |
110%+-5% (Go to fault mode after 5 minutes), |
Battery Mode |
110%+-5% (Shutdown after 5 minutes) |
Rating frequency |
12V/8.2AH x 1 |
Backup Tim – Typical |
10mins to 18mins (depending on load) |
Charge Current |
About 1A at normal mode |
Over Charge Protection |
>14.5V +/- 0.2V stop charging |
Weight |
5.6kg +/- 0.3Kg |
Dimension |
390x 145 x 220 (mm) |
Master Carton |
45.5 x 40 x 23.5 (cm) |